Dna air filter cleaner and oil, Air filter oils and accessories, motorcycle, motorbike, ATV, parts, accessories | Northern Accessories

DNA Air Filter Cleaner and Oil

Cleaning the filter: With DNA filters you must use their service kit only and not any other brand cleaner or oil because of the material the filter is made of.

Once you have applied a generous amount of the cleaner to the filter (soak for 10mins) and added a bit of water on the filter, the best thing to use is a small paint brush (25mm) and dab and brush the filter until it foams slightly and making sure to get into the "flutes" of the filter.

Rinse occasionally as you are brushing (dirty side towards clean) repeat if necessary until filter is white in color and all cleaner is removed with thorough rinsing.

****Gently****  blow excess water off the filter with air gun and apply oil as per instructions on the service kit box, (DNA-DSK-2000).

The filter should appear all red in colour once oil is applied and make sure all nooks and crannies are covered in oil.

Be careful not to "over oil" the filter because you may end up with a pool of oil on the ground under your bike and on the header pipes as the oil has run off the filter and out of the airbox drain.